Submarine Single Carcass Hose

SUBMARINE SINGLE CARCASS  HOSE

		510210 SCSEnd Reinforced without Float Collars Hose(ie. Under buoy)
		510211 SCSEnd Reinforced with Float Collars Hose(ie. Under buoy)
		510220 SCSMainline without Float Collars Hose
		510221 SCSMainline with Float Collars Hose
		510230 SCSEnd Reinforced without Float Collars Hose(ie. off PLEM)
		510231 SCSEnd Reinforced with Float Collars Hose(ie. off PLEM)
		510240 SCSBoth Ends Reinforced without Float Collars Hose
		510250 SCSReducing Hose without Float Collars Hose
		510260 SCSTail Hose without Float Collars Hose
		510270 SCSTanker Rail Hose

Plan Drawing of Product Structure:

Specification and Main Technical Parameters:

Acceptance Tests and Certificates:

We will supply the purchaser with individual test certificates for each finished hose,or certificates issued by a third member association of IACS-Internationa Association of Classification Societies including China(CCS),Norway-German(DNV-GL) and France(BV).

The following tests are to be conducted:

- Material tests(one order at a time)

- Adhesion tests – hose body and,if applicable,buoyancy material(one order at a time)

- Weight test(each hose)

- Minimum bend radius test(before hydrostatic pressure test,10% sampling)

- Bending stiffness test(10% sampling)

- Torsion test(if specified)

- Tensile test(if specified)

- Hydrostatic pressure test(each hose)

- Vacuum test(immediately after kero test.if not kero test,then immediately after hydrostatic test,each hose)

- Electrical test(each hose)

- Float hydrostatic test(only for floating hose,one order at a time)

- Lifting lug acceptance test(only for tank rail hose)

Hose Lifting Instruction

At least 3 point lifting is required, 5 point lifting is more favorable.

Packing:

Hose will be packed for storage and transport on steel framed pallets. Each steel pallet should be designed with a SWL of 12 ton and should be provided with markings.